Steve Whitelock and the Secrets of Racing
by Kevin Cameron
Wednesday, October 21, 2026
Steve Whitelock, former Ferrari mechanic, became Yvon DuHamel’s mechanic at Team Hansen Kawasaki where I met him. I was mechanic for English rider Cliff Carr. Steve and I both enjoyed language, racing, and dinner. Someone coined the term “Tubby Tuners” for the two of us plus the late Harold Sellors.
Once at Daytona he had temporary charge of the early Lambo' of NYC artist Larry Poons (who also owns a Seeley G-50). He was having trouble finding people with Marelli magneto experience and Steve was it. He invited me for a top speed run down one of the less-traveled “jungle roads” that used to serve as test tracks for 1960s bike racers.
Up, up went our speed, with satisfactory sounds from the “V-12 under glass” crossways in the chassis, just behind our heads.
Later, walking around the car, I saw that the free front corner of the bodywork, ahead of the tire, was secured in a very traditional way—by taking a piece of 20 mm tubing, pounding the ends flat, drilling holes through the flats, and bolting it in as a brace. Well, OK, the engine and trans are the main event.
In 1973 Yvon came in from practice with a terrible clatter. A rod was visible behind the pipes in front, the crank still whirling.
“What’d you do that for?” Steve chided. “You could’ve saved it.”
Yvon replied, “They pay me to ride. They don’t pay me to walk.”
Yvon would come in from a practice in which we saw him proceeding in a series of saves and wobbles, and when asked “How is it?” would answer, “Eet’s maybe a bit better.”
After Kawasaki Steve went to Honda in Europe. Sometimes it seemed to be about motocross, sometimes road race. He wasn’t telling. Steve was just the man for some non-governmental intelligence work. Once he’d somehow overstepped his remit and was sent home, spending the time off driving a concrete pump. Next he had been rewarded with a US agency for a French sprocket maker. He was inside, where the big secrets were.
During his time as AMA’s MX Manager, four-strokes had just replaced two-strokes. Steve got lots of calls about how expensive this was. Typical was one from an MX dad who told him,”Ah’m doin’ OK, Ah’m a plumber an’ I got seb’m trucks out. But ah jist don’t know how many more o’ them $3500 flow-bench cylinder heads ah kin swing.”
He became World Superbike’s tech manager, working for compromise. “I know you fellas have something up in your truck that you’d love to run here. But if you do, I have to remind you of the cards they’ll play if you do. You might want to wait a race or two.”
Trying always to keep racing—which he genuinely and permanently loved—from becoming anyone’s property. There were complaints that he bent the rules. Maybe he did, but I’m also sure he did it in the interest of the racing, not in the office, but on the track.
In time he was ousted by people I think of as “the moralists”. People like Steve know about the 4 mm tolerance of steering-head placement, but “the office workers” believed racing would be best served by accurate frame jigs and zero deviations. Everyone interested in such things soon learns otherwise. Muzzy once showed me how far off his new batch of race frames was, “out of the box.” I could see it—didn’t have to measure.
Last time we spoke Steve sounded all in. He knew there was no getting better. He had lots to say but was tired.
I miss him and his secrets, his contentious statements, his detailed insider knowledge.
Once at Daytona he had temporary charge of the early Lambo' of NYC artist Larry Poons (who also owns a Seeley G-50). He was having trouble finding people with Marelli magneto experience and Steve was it. He invited me for a top speed run down one of the less-traveled “jungle roads” that used to serve as test tracks for 1960s bike racers.
Up, up went our speed, with satisfactory sounds from the “V-12 under glass” crossways in the chassis, just behind our heads.
Later, walking around the car, I saw that the free front corner of the bodywork, ahead of the tire, was secured in a very traditional way—by taking a piece of 20 mm tubing, pounding the ends flat, drilling holes through the flats, and bolting it in as a brace. Well, OK, the engine and trans are the main event.
In 1973 Yvon came in from practice with a terrible clatter. A rod was visible behind the pipes in front, the crank still whirling.
“What’d you do that for?” Steve chided. “You could’ve saved it.”
Yvon replied, “They pay me to ride. They don’t pay me to walk.”
Yvon would come in from a practice in which we saw him proceeding in a series of saves and wobbles, and when asked “How is it?” would answer, “Eet’s maybe a bit better.”
After Kawasaki Steve went to Honda in Europe. Sometimes it seemed to be about motocross, sometimes road race. He wasn’t telling. Steve was just the man for some non-governmental intelligence work. Once he’d somehow overstepped his remit and was sent home, spending the time off driving a concrete pump. Next he had been rewarded with a US agency for a French sprocket maker. He was inside, where the big secrets were.
During his time as AMA’s MX Manager, four-strokes had just replaced two-strokes. Steve got lots of calls about how expensive this was. Typical was one from an MX dad who told him,”Ah’m doin’ OK, Ah’m a plumber an’ I got seb’m trucks out. But ah jist don’t know how many more o’ them $3500 flow-bench cylinder heads ah kin swing.”
He became World Superbike’s tech manager, working for compromise. “I know you fellas have something up in your truck that you’d love to run here. But if you do, I have to remind you of the cards they’ll play if you do. You might want to wait a race or two.”
Trying always to keep racing—which he genuinely and permanently loved—from becoming anyone’s property. There were complaints that he bent the rules. Maybe he did, but I’m also sure he did it in the interest of the racing, not in the office, but on the track.
In time he was ousted by people I think of as “the moralists”. People like Steve know about the 4 mm tolerance of steering-head placement, but “the office workers” believed racing would be best served by accurate frame jigs and zero deviations. Everyone interested in such things soon learns otherwise. Muzzy once showed me how far off his new batch of race frames was, “out of the box.” I could see it—didn’t have to measure.
Last time we spoke Steve sounded all in. He knew there was no getting better. He had lots to say but was tired.
I miss him and his secrets, his contentious statements, his detailed insider knowledge.
— ends —
